Vsett 10+ Error Code 06

JT3

Hello guys,

I have got about 110 miles on the scooter thus far and no problems. Battery was at about 60-70% when I left to work. Got the error code 06 flashing about halfway and started to lose power and now the scooter won’t move at all

I checked the manual and it says P03 and P13 settings should be checked but I haven’t touched those since I got the scooter and wanted to maybe know what those default settings should be at thinking maybe it somehow was adjusted?

Any suggestions I’d take, definitely want to get back riding asap!

Currently plugged in and charging since that was a suggestion in the manual

DrScootLittle

What settings do you have for P03 and P13?

Strangely our 10+ arrived with P03 set to 52V, and this hasn’t caused any error codes, though it may be affecting the battery gauge. Ours has P13 set to 42V.

The only other thing I can think of, other than charging it up again, would be to unplug the main battery connector and re-seat it.

AirCanada143

Error code 6 flashing may be an indication that your cruiser wants a 6 inch meatball and cheese sub from subway ? Just a thought. After that the error code may go away, till you go past McDonald’s…

GTRXRider

Why do they actually bother with those P settings to begin with instead of … not? Showing Sport mode vs. P5 or some such. Error codes and a description in the manual be nice (a manual that actually applies to the scooter and does not show wrong voltages. Why would you even be able to select that?)