Deciphering Scooter tire sizes

Headhunter

I have an Emove cruiser. It has a two ply tire on it, with poor tread design. It is such an odd size, and there is no choices of tread design

If I deciphered it right a 10×3× 6.5 will fit in place of the stock 10×2.75×6.5. If the peanut gallery here can’t figure it out, no one can.😎

I did a forum Search and didn’t come up with anything. Scooter tire manufacturers need to focus on which system they are going to adopt for scooters

Thanks in advance ‼️

DrScootLittle

Yes, if you can find a 10″ outside diameter tire that’s 3″ wide and fits on a 6.5 in wheel, that should do it. The tricky part is that the Cruiser uses a tubeless tire, so that may be really hard to find something that’s made to run tubeless (made to have a really good seal between the bead and rim.

If you see one with a width of 70 to 75 then that’s a metric width of 70mm (2.75″) and 75mm (3.0″) respectively

The only other tire I can think of that’s close is the one that the Ninebot Max uses, but it’s noticeably narrower at
60/70-76.5
-Paul

Headhunter

DrScootLittle thank you, I knew you guys would not let me down. Being wider, that could that fit on existing my 2.75 wheel or would I have to get a 3 inch wheel? I’ve been bookmarking a whole bunch of tire website but I think I found a Perelli or Dunlop…. I will have to go back and check.