Hello would appreciate any answers!π
I am testing the front wheel motor hub on an xbd glide s9 which apparently is alot like m365 xiaomi
Anyway..so I have tested the current ohms from all wires battery and through accelerator down to hub there are no breakages and the V go up a bit when the accelerator throttle is moved (that tests fine at the top..)
..my question is this π€..I just need to know if I am supposed to get a constant 42v somewhere at the wheel hub motor on one of the wires!
I notice three or four of them go up slightly and change in voltage when throttle is used but I need to know if there is a defect on the motor..
Is there a constant supply of 42v from the battery there also just like there is up at the top near the handlebars and instrument panel?if so which coloured cable.
Just need to know if there is supposed to be constant voltage there at all..probably not..or just when the throttle is turned.is it supposed to be 42v?(battery capacity)?!
Many thanks ..π
Basically I twisted it the wrong way a while ago and broke 3 of the cables running inside the front which I have rewired and it does constant short beeps and inside the controller box has six short red led flashed which I canβt find on the Web
So need to find where I have shorted something all wired and cables look fine no burnt things
Thankyouππ